Barrier of Flame

4th-level environmental

Activation Time: 1 action
Range: 120 feet
Duration: Concentration, up to 1 minute

You create a fiery barrier along a solid surface within range for the duration. This barrier fills up to 12 5-foot squares. Each square must touch the face or corner of at least one other square (such as a 20-foot diameter) and must be within range. The flames reach 20 feet into the air. The barrier is difficult to see through, revealing only silhouettes of those beyond it within 10 feet.

When the barrier is activated, each creature within its area must make a Dexterity saving throw. On a failed save, a creature takes 5d6 + your power ability modifier fire damage, or half as much damage on a successful save.

You can control the barrier's heat, causing one side of the wall, selected by you when you activate this power, to deal 5d6 + your power ability modifier fire damage to each creature that ends its turn within 10 feet of that side. Alternately you can cause this damage to creatures within 5 feet of both sides of the wall. A creature takes the same damage when it enters the flames of the barrier for the first time on a turn or ends its turn there.

At Higher Levels. When you activate this power using a higher level power slot, for every level above 4th you can either increase the damage by 1d6 or add 2 additional 5-foot squares.

Unless otherwise stated, the content of this page is licensed under Creative Commons Attribution-ShareAlike 3.0 License